
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X70-50B is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 20 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X70-50B is a double-acting compact cylinder featuring an external R (M10x1.25) adjuster screw that dials the extend stop from 20 to 70 mm on-site.
Its short riveted body minimizes axial mounting depth where round-body or profile cylinders cannot fit. This specific SKU includes a male M10x1.25 piston rod end and lacks a piston magnet, meaning it cannot host reed or electronic switches. End-of-travel deceleration relies strictly on a fixed NBR bumper, which is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X70-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 70 mm |
| Adjustable range | 20 – 70 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 20 to 70 mm via the M10x1.25 screw to accommodate varying jig heights during production line changeovers without swapping cylinders.
Set the exact 20.5 kg vertical insertion depth for light bearing presses, relying on the fixed NBR bumper to absorb the final end shock.
When sizing this 32 mm bore, verify your thrust requirements against its neighbors.
This model suits operators needing frequent on-machine stroke tuning between 20 and 70 mm during changeovers. Confirm the PT1/8 port, the 50 mm adjustment window, and the male M10x1.25 rod thread. Note that a plain cylinder drifts when air is lost or the valve is centered; the fixed bumper only decelerates the stroke end and does not lock the load. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa.
Turning the external R (M10x1.25) screw mechanically shortens the extend stroke by up to 50 mm, yielding a usable 20-70 mm range. This specific SKU lacks the -S magnet, so it cannot host reed or electronic switches; choose the -S variant if sensing is required.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.