verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X75-10B

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X75-10B is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 65 to 75 mm on the machine — no shims, no part change.

  • BoreØ32 mm
  • Max stroke75 mm
  • Adjustable range65–75 mm
  • Adjuster threadM10×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$50.00 $57.50Save 13% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ32 stroke, mounting and version on one page All SDAJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X75-10B

The AirTAC SDAJ32X75-10B is a compact double-acting double-rod cylinder featuring an external M10x1.25 adjustment screw. Turning this R thread lets you dial the extend stop down by 10 mm on-site, yielding a usable extend range of 65 to 75 mm without swapping shims or parts.

The short riveted body saves axial mounting depth where a round-body or profile cylinder will not fit. This SKU uses a male M10x1.25 piston rod thread and includes no piston magnet, so it cannot accept magnetic switches. End shock is handled by a fixed NBR bumper that decelerates the stroke end, rather than an adjustable air cushion.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X75-10B Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X75-10B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ32 mm
Max stroke75 mm
Adjustable range65 – 75 mm
Adjuster thread (R)M10×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM6×1.0 F / M10×1.25 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X75-10B

SDAJCompact double-acting cylinder with adjustable stroke.
32Bore size in mm.
×75Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X75-10B Is Used

precision_manufacturing

Tooling Changeover

Dial the extend stop from 65 to 75 mm during machine setup to align new grippers perfectly without machining new spacers.

conveyor_belt

Flight Transfer Diverter

Fine-tune the pusher stroke by 10 mm on-site to accommodate varying carton widths on a packaging line.

sync_alt

Trial Positioning Stops

Adjust the male M10x1.25 rod endpoint incrementally during prototype assembly to find the exact clamping contact point.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X75-10B the Right Cylinder?

This model is ideal for operators needing on-site stroke tuning during frequent changeovers. Confirm your requirements for the 32 mm bore, 75 mm maximum stroke, 10 mm window, PT1/8 port, and the male M10x1.25 rod thread. Remember that a plain cylinder does not hold its load on air loss or when a valve is centred; the piston drifts and the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 65–75 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M10×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X75-10B FAQ

At 0.7 MPa, push is 563 N and pull is 483.8 N. The theoretical maximum push is 82 kgf at 1.0 MPa.

The M10x1.25 R screw shortens the extend stop by up to 10 mm, giving a 65 to 75 mm range. This specific SKU lacks the -S code, meaning it has no piston magnet and cannot accept reed or electronic switches. The -S variant would add a magnet for sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X75-10B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ32X75-10B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.