
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X75-20SB is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 55 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X75-20SB is a compact double-acting double-rod cylinder featuring an external extend stop. Turning the R (M10x1.25) adjuster screw lets you dial the outward travel anywhere between 55 and 75 mm directly on the machine, avoiding part swaps.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches and a male M10x1.25 threaded rod end. Its short riveted body minimizes axial mounting depth where space is tight. End-of-travel deceleration relies on a fixed NBR bumper, which is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X75-20SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 75 mm |
| Adjustable range | 55 – 75 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 55 to 75 mm via the R screw to match varying jig heights during production line changeovers without swapping cylinders.
Set precise insertion depths for pins or plugs, relying on the fixed NBR bumper to absorb the 30-500 mm/s approach impact.
Dropping down to an SDAJ25 yields 245.4 N, whereas stepping up to an SDAJ40 provides 628.3 N. Choose this specific model when setups demand frequent trial positioning or on-site stroke tuning.
Confirm the 75 mm maximum stroke, 20 mm adjustment window, and PT1/8 air port. This SKU includes the -S magnet for sensing and the -B male M10x1.25 piston rod. Note that a plain compact cylinder drifts if air pressure drops or the valve centers; the fixed bumper only softens the end impact. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.5 MPa this 32 mm bore cylinder pushes with 402.1 N and pulls with 345.6 N. At 0.7 MPa it pushes 563 N and pulls 483.8 N. The theoretical maximum push force is 82 kgf at 1.0 MPa.
The M10x1.25 R screw mechanically shortens the extend stroke from the 75 mm maximum down to 55 mm; it does not alter force. The included -S magnet enables position sensing using AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.