
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X75-40B is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 35 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X75-40B is a compact double-acting double-rod cylinder featuring an external M10x1.25 adjustment screw that dials the extend stop from 35 to 75 mm directly on your equipment. This SKU uses a male M10x1.25 piston rod thread instead of the default female M6x1.0.
The short riveted body drastically reduces axial mounting depth where a larger profile cylinder will not fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific model lacks a piston magnet, so it cannot support reed or electronic switches without changing to an -S variant.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X75-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 75 mm |
| Adjustable range | 35 – 75 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the male M10x1.25 rod on the fly to pin parts at different heights during short-run production, relying on the fixed NBR bumper to absorb end shocks.
When sizing this 32 mm bore, evaluate both neighbouring options.
Choose this specific configuration if your fixture requires frequent changeovers or trial positioning within the 35 to 75 mm window. It features a PT1/8 port and a male M10x1.25 rod thread. Keep in mind that a plain cylinder does not hold a load if air pressure drops or the valve centres; the piston will drift. For suspended or vertical loads, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.7 MPa the push increases to 563 N and the pull to 483.8 N. The theoretical maximum push is 82 kgf at 1.0 MPa.
Turning the M10x1.25 R screw shortens the extend stroke by up to 40 mm, allowing on-machine tuning between 35 and 75 mm. This screw acts only as a mechanical stop and does not alter force. The cylinder cannot hold a load without live air pressure; use an external rod lock for load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.