verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X75-50

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X75-50 is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 25 to 75 mm on the machine — no shims, no part change.

  • BoreØ32 mm
  • Max stroke75 mm
  • Adjustable range25–75 mm
  • Adjuster threadM10×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$50.00 $57.50Save 13% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ32 stroke, mounting and version on one page All SDAJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X75-50

The AirTAC SDAJ32X75-50 is a double-acting compact cylinder featuring an external M10x1.25 adjuster screw that dials the extend stop anywhere between 25 and 75 mm directly on your machine.

Its short riveted body drastically cuts axial mounting depth where larger profile variants will not fit. End shock is managed strictly by a fixed NBR bumper, meaning there is no tuneable air cushion, and the rod end offers a female M6x1.0 thread.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X75-50 Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X75-50
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ32 mm
Max stroke75 mm
Adjustable range25 – 75 mm
Adjuster thread (R)M10×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM6×1.0 F / M10×1.25 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X75-50

SDAJCompact double-acting cylinder with adjustable stroke.
32Bore size in mm.
×75Maximum stroke length in mm.
-50Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X75-50 Is Used

precision_manufacturing

Tooling Changeovers

Dial the extend stop from 25 to 75 mm during fixture swaps to accommodate varied part heights without machining new spacers.

science

Prototype Positioning

Iterate extend endpoints safely during R&D testing; the fixed NBR bumper absorbs end-of-travel shock while you seek the exact 241 N working load contact point.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X75-50 the Right Cylinder?

Operators who require frequent changeovers or trial positioning will benefit from the 50 mm adjustment window. Remember that this unit lacks the S magnet option, so position sensing is unavailable here. Furthermore, the mechanical stop and fixed bumper do not secure loads during air loss; integrate an external rod lock or pilot-operated check valve for holding requirements.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 25–75 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M10×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X75-50 FAQ

The theoretical maximum output is 82 kgf at 1.0 MPa.

Turning the R (M10x1.25) screw mechanically shortens the forward stroke endpoint down to 25 mm from the 75 mm maximum. This sets the physical stop position and does not alter pneumatic force or lock the piston mid-stroke.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X75-50

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ32X75-50 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.