
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X75-50SB is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 25 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X75-50SB is a compact double-acting double-rod cylinder featuring an external extend stop. By turning the R (M10x1.25) adjuster screw, you can dial the extend position anywhere between 25 and 75 mm directly on the machine without swapping shims or parts. The short riveted body saves axial mounting depth where a round-body or profile cylinder will not fit.
This specific build includes a male M10x1.25 piston rod and a built-in magnet for AirTAC reed or electronic switches. End shock is absorbed by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X75-50SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 75 mm |
| Adjustable range | 25 – 75 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 25 to 75 mm to find the exact contact point on prototype jigs without machining new spacers.
Rotate the M10x1.25 adjuster to accommodate different part widths on a shared fixture, cutting setup time between batches.
Choose this configuration when you need on-site stroke tuning for frequent changeovers. Confirm the 32 mm bore, 75 mm maximum stroke, 50 mm adjust window, PT1/8 port, male M10x1.25 rod thread, and the -S magnet. Remember that a plain cylinder does not hold its load on air loss or valve centring—the piston drifts and the bumper only decelerates near the end. For a held load, specify an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa.
The R (M10x1.25) screw shortens the extend end position by up to 50 mm, giving a usable range of 25 to 75 mm. The -S option adds a piston magnet for AirTAC reed or electronic switches; the fixed NBR bumper decelerates the stroke end but is not a lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.