
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X80-50SBH is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 30 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X80-50SBH is a compact double-acting double-rod cylinder featuring an on-site extend stop. A built-in M10x1.25 adjuster screw lets you dial the outward stroke anywhere between 30 and 80 mm directly on the machine, eliminating the need for shims or part swaps.
This variant includes a male M10x1.25 piston rod thread and a high-temperature fluororubber (FKM) seal option. The short riveted body saves valuable axial mounting depth where larger profile or round-body units will not fit. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion or a braking lock.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X80-50SBH |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 80 mm |
| Adjustable range | 30 – 80 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 30 and 80 mm to set precise clamping depth on machining fixtures, accommodating raw material thickness variations without swapping parts.
Speed up product changeovers on packaging lines by turning the M10x1.25 adjuster screw to instantly shift the actuator endpoint for different carton formats.
Use the 50 mm adjustment window during R&D and prototyping to safely test multiple reach distances before locking down a final mechanical position.
When sizing this 32 mm bore unit, compare it directly with its neighbours. The SDAJ32X80-50SBH provides a theoretical maximum push of 82 kgf at 1.0 MPa.
Choose this specific configuration if your fixture requires frequent changeovers or trial positioning within the 30 to 80 mm extend window. Confirm your requirements for the PT1/8 port, the male M10x1.25 rod, and the FKM seals. Note that a plain cylinder drifts when air is lost or the valve is centered; the fixed bumper only decelerates the stroke end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.
The external M10x1.25 screw shortens the extend stroke by up to 50 mm, yielding a usable range of 30 to 80 mm. The included -S magnet allows you to track piston position using AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.