verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X85-20SB

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X85-20SB is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 65 to 85 mm on the machine — no shims, no part change.

  • BoreØ32 mm
  • Max stroke85 mm
  • Adjustable range65–85 mm
  • Adjuster threadM10×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$64.17 $71.67Save 10% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ32 stroke, mounting and version on one page All SDAJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X85-20SB

The AirTAC SDAJ32X85-20SB is a compact double-acting double-rod cylinder featuring an on-site adjustable extend stop. A male M10x1.25 piston rod thread comes standard with this variant, and turning the external R (M10x1.25) adjuster screw lets you dial the extend position anywhere between 65 and 85 mm without changing parts.

Built with a short riveted body, this unit saves axial mounting depth where a larger profile cylinder will not fit. It relies on a fixed NBR bumper at each end to decelerate the stroke, meaning it is not an adjustable air cushion. The built-in piston magnet (-S) supports AirTAC reed or electronic switches for position sensing.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X85-20SB Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X85-20SB
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ32 mm
Max stroke85 mm
Adjustable range65 – 85 mm
Adjuster thread (R)M10×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM6×1.0 F / M10×1.25 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X85-20SB

SDAJCompact double-acting cylinder with adjustable stroke.
32Bore size in mm.
×85Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X85-20SB Is Used

precision_manufacturing

Gauge Bracket Feeding

Dial the extend stop from 65 to 85 mm during initial tool setup to hit varying material widths without machining custom spacers.

science

Trial Probe Contact

Set a precise mechanical stop for delicate testing fixtures, ensuring the piston bottoms out safely against the fixed NBR bumper at the adjusted length.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X85-20SB the Right Cylinder?

Operators who need frequent trial positioning or rapid machine changeover benefit most from this 20 mm adjustment window. Confirm your requirements for the 85 mm maximum stroke, 65-85 mm usable extend, PT1/8 port, male M10x1.25 rod, and the -S magnet. Remember that a plain compact cylinder drifts when air is lost or the valve centers; the fixed bumper only decelerates near the end of travel. Use an external rod lock or pilot-operated check valve if you must hold a load safely without live pressure.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 65–85 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M10×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X85-20SB FAQ

The R (M10x1.25) screw shortens the extend stroke by up to 20 mm, giving a usable range of 65-85 mm. The -S code denotes a built-in piston magnet compatible with AirTAC reed or electronic solid-state switches.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X85-20SB

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ32X85-20SB and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.