
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X85-30SB is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 55 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X85-30SB is a compact double-acting double-rod cylinder featuring an external extend stop. A built-in magnet and male M10x1.25 piston rod come standard on this unit. Turning the R (M10x1.25) adjuster screw lets you dial the extend position down by 30 mm, yielding a usable forward range of 55 to 85 mm directly on the machine without swapping parts.
The short riveted body saves axial mounting depth where a larger profile cylinder will not fit. End-of-travel deceleration relies on a fixed NBR bumper rather than an adjustable air cushion. This mechanical stop sets the end position securely but does not function as a mid-stroke lock.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X85-30SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 85 mm |
| Adjustable range | 55 – 85 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 55 and 85 mm during fixture swaps to accommodate varying part heights without machining new spacers.
Iterate on sensor targets and engagement points during R&D setups by turning the M10x1.25 adjuster screw rather than replacing the actuator.
Choose this specific configuration when your fixture requires a male-threaded M10x1.25 rod end and position feedback via an electronic or reed switch.
Operators who need frequent changeover or trial positioning benefit most from the 30 mm adjustment window. Remember that a plain compact cylinder drifts when air is lost or the valve is centred; the fixed bumper only softens the impact near the end of travel. For load holding without live pressure, install an external rod lock or pilot-operated check valve. This model uses a PT1/8 port, operates at 30-500 mm/s, and carries the S and B option codes.
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa. Operating pressure spans 0.15 to 1.0 MPa, with a speed range of 30-500 mm/s.
The external R (M10x1.25) screw shortens the forward stroke by up to 30 mm, allowing you to set the end position anywhere between 55 and 85 mm. The included -S magnet enables position detection using AirTAC reed or electronic solid-state switches mounted in the body grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.