Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X85-75
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X85-75 is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 10 to 85 mm on the machine — no shims, no part change.
- BoreØ32 mm
- Max stroke85 mm
- Adjustable range10–85 mm
- Adjuster threadM10×1.25
- Port sizePT1/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X85-75
The AirTAC SDAJ32X85-75 is a double-acting compact cylinder featuring an external adjustable extend stop. A M10x1.25 adjuster screw lets you dial the outward stroke on-site anywhere from 10 to 85 mm, eliminating the need for shims or part swaps during changeovers.
The short riveted body drastically cuts axial mounting depth, fitting where round-body alternatives cannot. End-of-travel deceleration relies on a fixed NBR bumper rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so position sensing is not supported without switching to the -S variant.
Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X85-75 Technical Specifications
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X85-75 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 85 mm |
| Adjustable range | 10 – 85 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X85-75
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X85-75 Is Used
Tooling Changeover Stations
Dial the extend stop from 10 to 85 mm via the M10x1.25 screw to accommodate varying fixture heights during rapid product line changeovers.
Variable Depth Flap Folding
Adjust the mechanical stop on the fly for different carton depths, letting the fixed NBR bumper absorb the end shock at cycle completion.
Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X85-75 the Right Cylinder?
It is the right pick for setups demanding frequent on-machine stroke tuning.
Verify your parameters: 32 mm bore, 85 mm max stroke, 75 mm window, PT1/8 port, female M6x1.0 rod thread, and no magnet. Remember that a plain cylinder drifts when air is lost or the valve centers—the fixed bumper only softens the impact near the end and acts as a mechanical stop, not a lock. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 10–85 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M10×1.25 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X85-75 FAQ
Turning the R (M10x1.25) external screw shortens the extend end position by up to 75 mm, giving a usable range of 10 to 85 mm. It sets the mechanical stop and does not alter the output force.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X85-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.