
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X85-75SB is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 10 to 85 mm on the machine — no shims, no part change.
The SDAJ32X85-75SB is a double-acting compact cylinder featuring a 32mm bore and an external adjustable extend stop. A built-in piston magnet and male M10x1.25 rod thread come standard on this variant. Turning the M10x1.25 adjuster screw lets you dial the extend position anywhere between 10mm and 85mm directly on the machine, eliminating the need for shims or part swaps during changeovers. Retract remains at the full stroke length.
The short riveted body saves axial mounting depth where round-body or profile cylinders will not fit. End-of-travel deceleration relies on a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X85-75SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 85 mm |
| Adjustable range | 10 – 85 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 85mm down to 10mm via the M10x1.25 screw to accommodate different fixture heights during production line changeovers.
Fine-tune the extend endpoint during prototype runs without swapping parts, relying on the fixed NBR bumper to absorb end shock.
This model is ideal for setups requiring frequent on-site stroke tuning.
Confirm the 32mm bore, 85mm maximum stroke, 75mm adjust window, and PT1/8 port. This specific SKU includes the -S magnet for AirTAC reed or electronic switches and the -B male M10x1.25 rod end. Remember that a plain cylinder does not hold position on air loss or valve centering; the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
Operating pressure is 0.15-1.0 MPa, speed is 30-500mm/s, and temperature ranges from -20 to +70 C.
The external M10x1.25 screw shortens the extend stroke by up to 75mm, yielding a usable range of 10-85mm without changing force. The included -S magnet enables position sensing with AirTAC reed or electronic switches mounted in the body grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.