
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X90-10S is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 80 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X90-10S is a double-acting compact cylinder featuring an external extend stop. An M10x1.25 adjuster screw lets you dial the forward end-position between 80 and 90 mm directly on the machine, eliminating the need for shims or part swaps.
The short riveted body drastically reduces axial mounting depth, fitting where round-body alternatives cannot. This specific configuration includes a built-in piston magnet for AirTAC reed or electronic switches, and relies on a fixed NBR bumper to decelerate the stroke end rather than an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X90-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 90 mm |
| Adjustable range | 80 – 90 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 80 to 90 mm extend stop on machining fixtures to compensate for tool wear without disassembling the cylinder.
Fine-tune the forward stroke on packaging lines to accommodate varying box heights, ensuring precise flap alignment during rapid changeovers.
When sizing this unit, evaluate the neighbouring bores for your exact force requirements.
This model is tailored for operators who require precise on-site stroke tuning during frequent changeovers. Remember that a plain cylinder does not hold its load upon air loss or valve centring; the piston drifts and the fixed bumper only decelerates near the end. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve. Confirm your bore, 90 mm maximum stroke, 10 mm window, PT1/8 port, female M6x1.0 rod thread, and the -S magnet option before ordering.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The M10x1.25 R screw shortens the extend stroke by up to 10 mm, giving an 80 to 90 mm usable range. The included -S magnet works with AirTAC reed or electronic switches for end-position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.