verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X90-10SB

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X90-10SB is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 80 to 90 mm on the machine — no shims, no part change.

  • BoreØ32 mm
  • Max stroke90 mm
  • Adjustable range80–90 mm
  • Adjuster threadM10×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$66.75 $74.25Save 10% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ32 stroke, mounting and version on one page All SDAJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X90-10SB

The AirTAC SDAJ32X90-10SB is a compact double-acting double-rod cylinder featuring an external M10x1.25 adjustment screw that lets you dial the extend stop down from 90mm to 80mm directly on your machine.

This variant includes a built-in piston magnet for AirTAC reed or electronic switches and a male M10x1.25 piston rod end. Its short riveted body minimizes axial mounting depth where space is tight. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X90-10SB Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X90-10SB
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ32 mm
Max stroke90 mm
Adjustable range80 – 90 mm
Adjuster thread (R)M10×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM6×1.0 F / M10×1.25 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X90-10SB

SDAJCompact double-acting cylinder with adjustable stroke.
32Bore size in mm.
×90Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X90-10SB Is Used

precision_manufacturing

Tooling Changeovers

Dial the 10mm extend window to fine-tune the 402.1N clamping position when swapping machining fixtures on a shared base plate.

packaging

Carton Flap Folding

Adjust the male M10 rod tip between 80mm and 90mm to accommodate varying box heights without swapping the entire actuator.

straighten

Trial Positioning

Use the M10x1.25 adjuster to find the exact 20.5kg vertical lift point during prototype assembly before locking the stop.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X90-10SB the Right Cylinder?

Choose this specific model if your fixture requires on-site stroke tuning during changeovers.

Confirm your parameters: 32mm bore, 90mm max stroke, 10mm adjust window, PT1/8 port, male M10x1.25 rod thread, and the -S magnet. Remember that a plain cylinder drifts when air is lost or the valve is centered; the fixed bumper only decelerates near the end and the R screw is a mechanical stop, not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 80–90 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M10×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X90-10SB FAQ

The theoretical maximum push is 82kgf at 1.0MPa.

The external M10x1.25 screw shortens the extend stroke from 90mm down to 80mm without shims. The included -S magnet works with AirTAC reed or electronic switches to detect position via the body grooves.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X90-10SB

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ32X90-10SB and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.