Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X90-20B
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X90-20B is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 70 to 90 mm on the machine — no shims, no part change.
- BoreØ32 mm
- Max stroke90 mm
- Adjustable range70–90 mm
- Adjuster threadM10×1.25
- Port sizePT1/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X90-20B
The AirTAC SDAJ32X90-20B is a compact double-acting double-rod cylinder built for applications requiring precise extend positioning. An external M10x1.25 adjuster screw lets you dial the forward stop from 70 to 90 mm directly on the machine, eliminating the need for shims or part swaps.
This variant features a male M10x1.25 piston rod thread and lacks a piston magnet, meaning it cannot host reed or electronic switches. The short riveted body minimizes axial mounting depth, fitting where larger profile cylinders cannot. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion or a locking mechanism.
Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X90-20B Technical Specifications
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X90-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 90 mm |
| Adjustable range | 70 – 90 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X90-20B
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X90-20B Is Used
Tooling Changeover
Dial the extend stop from 70 to 90 mm during machine changeovers to accommodate different part heights without machining new spacers.
Bending Stop Setup
Use the male M10x1.25 rod end as an adjustable physical stop for light metal bending, tweaking the 20 mm window to find the exact angle during trial runs.
Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X90-20B the Right Cylinder?
Choose this specific model if your fixture requires on-site stroke tuning between 70 and 90 mm.
Confirm your parameters: 32 mm bore, 90 mm maximum stroke, 20 mm adjustment window, PT1/8 air port, male M10x1.25 rod thread, and no magnet. Note that a plain cylinder drifts when air is lost or the valve centers; the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 70–90 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M10×1.25 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X90-20B FAQ
The theoretical maximum push is 82 kgf at 1.0 MPa.
No, this specific SKU lacks the -S option, meaning it has no piston magnet and cannot host reed or electronic switches. You would need the SDAJ32X90-20BS variant to utilize AirTAC sensing accessories.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X90-20B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.