
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X90-75S is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 15 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X90-75S is a double-acting compact cylinder featuring an external adjustable extend stop. An M10x1.25 adjuster screw lets you dial the outward stroke anywhere between 15 and 90 mm directly on the machine, eliminating the need for shims or part swaps during changeovers.
Its short riveted body significantly reduces axial mounting depth where a larger profile cylinder will not fit. The unit relies on a fixed NBR bumper to decelerate the piston at the stroke extremes rather than an adjustable air cushion. Equipped with a built-in piston magnet (-S), it supports AirTAC reed or electronic solid-state switches for precise end-position sensing.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X90-75S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 90 mm |
| Adjustable range | 15 – 90 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 15 to 90 mm to test multiple part lengths on a single fixture without machining new spacers.
Leverage the compact riveted body to fit a 402.1 N clamping force into tight machine cells where axial space is restricted.
Turn the M10x1.25 screw to rapidly reposition a stop for new product runs, cutting setup time from minutes to seconds.
Choose this specific model if your fixture requires frequent on-site stroke tuning across a 75 mm adjustment window.
Confirm the 90 mm maximum stroke, 75 mm window, and PT1/8 port match your pneumatic layout. The -S magnet is present for switch integration, and the rod end features a female M6x1.0 thread (male M10x1.25 optional). Note that a plain cylinder does not hold its load on air loss or when the valve is centred; the piston drifts and the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa.
The external screw shortens the extend stroke by up to 75 mm, yielding a usable 15 to 90 mm range. The included -S magnet works with AirTAC reed or electronic switches to confirm end positions.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.