
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X100-10 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 90 to 100 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X100-10 is a compact double-acting double-rod cylinder built for tight axial spaces, featuring a short riveted body that saves mounting depth where larger profile variants fail to fit. An external M12x1.25 adjuster screw lets you dial the extend stop directly on the machine, shortening the forward end by up to 10 mm for a usable range of 90 to 100 mm without swapping shims or parts.
End-of-travel shock is handled by a fixed NBR bumper that decelerates the piston, which is not an adjustable air cushion. This specific SKU lacks a piston magnet, so it cannot host reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X100-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 100 mm |
| Adjustable range | 90 – 100 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the M12x1.25 screw to trim the 100 mm extend down to 90 mm, perfecting the contact depth on machining fixtures without fabricating new spacers.
Choose this unit when your setup requires on-site stroke tuning between 90 and 100 mm to perfect a trial position.
Confirm the bore, 100 mm maximum stroke, 10 mm window, PT1/8 port, female M8x1.25 rod-end thread, and the absence of a magnet. Note that a plain cylinder does not hold its load when air is lost or the valve is centred, as the piston drifts and the fixed bumper only decelerates near the end without acting as a lock. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
The external M12x1.25 screw acts as a mechanical stop, allowing you to shorten the extend stroke from the 100 mm maximum down to 90 mm on the machine. It sets the end position without changing the force, and it is not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.