
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X100-100 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 100 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X100-100 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M12x1.25) screw, you can dial the extend position from 0 up to 100 mm directly on the machine, eliminating the need for shims or part swaps during setup. Retract remains a full stroke.
Built with a short riveted body, this unit saves axial mounting depth where round-body or profile cylinders cannot fit. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion or a locking brake.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X100-100 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 100 mm |
| Adjustable range | 0 – 100 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 100 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Maximum stroke length in mm. |
| -100 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 0 to 100 mm via the R screw to accommodate varying fixture lengths on machining lines without swapping cylinders.
It features a 16 mm rod, a female M8x1.25 rod-end thread, and a PT1/8 air port.
Note that this specific SKU lacks a piston magnet (-S) and cannot accept magnetic switches. Furthermore, a plain cylinder does not hold its load if air pressure drops or the valve is centered—the piston will drift. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj40-adjustable-cylinder
Quick checklist
Turning the external R (M12x1.25) screw shortens the extend end position by up to 100 mm, giving a usable extend range of 0 to 100 mm. It acts as a mechanical stop and does not change the cylinder's force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.