
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X100-10B is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 90 to 100 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X100-10B is a double-acting compact cylinder featuring an external extend stop. An M12x1.25 adjustment screw lets you dial the forward stroke down from 100 mm to 90 mm directly on the machine, eliminating the need for shims or part swaps. The retract distance remains full.
This model uses a short riveted body that saves axial mounting depth where round-body or profile cylinders will not fit. End shock is managed by a fixed NBR bumper, which decelerates the piston near the end of travel but is not an adjustable air cushion. The male-thread piston rod (M14x1.5) handles direct mounting, and the PT1/8 port matches the 40 mm bore specification.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X100-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 100 mm |
| Adjustable range | 90 – 100 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 90 to 100 mm to set exact clamping depth on machining fixtures, absorbing part variance without fabricating new spacers.
When sizing this 40 mm bore actuator, evaluate both directions. Choose this unit if your fixture requires precise on-site stroke tuning during changeovers. Verify your parameters: 40 mm bore, 100 mm max stroke, 10 mm adjust window, PT1/8 port, male M14x1.5 rod, and no piston magnet. Note that a plain cylinder does not hold a load on air loss or valve centering; the piston drifts and the bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.7 MPa, push is 879.6 N and pull is 738.9 N. The theoretical maximum push is 128 kgf at 1.0 MPa.
Turning the M12x1.25 adjuster screw shortens the forward end position by up to 10 mm, giving a usable range of 90 to 100 mm. This sets a mechanical stop and does not alter force. It is not a mid-stroke lock; the cylinder cannot hold a load if air pressure is lost.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.