
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X100-10SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 90 to 100 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X100-10SB is a compact double-acting double-rod cylinder featuring an external M12x1.25 adjustment screw. Turning this R thread lets you dial the extend end-position on-site across a 90 to 100 mm window, removing the need for shims or part swaps during machine commissioning.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches and a male M14x1.5 piston rod end. The short riveted body drastically cuts axial mounting depth where round-body or profile cylinders cannot fit. End-of-stroke energy is managed by a fixed NBR bumper that decelerates the piston, rather than an adjustable air cushion. Operating speed spans 30 to 500 mm/s across a 0.15 to 1.0 MPa pressure range.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X100-10SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 100 mm |
| Adjustable range | 90 – 100 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop precisely between 90 and 100 mm during fixture swaps, using the male M14x1.5 rod to secure varied tooling heads without machining new spacers.
This specific model is ideal for setups requiring on-site stroke tuning, featuring the -S magnet for position sensing and the -B male M14x1.5 rod thread. Remember that a plain compact cylinder does not hold its load if air pressure drops or the valve centres; the piston will drift. For load holding without live pressure, install an external rod lock or a pilot-operated check valve. Confirm your required 90 to 100 mm extend window, PT1/8 port, and 16 mm rod diameter fit your mounting envelope.
Quick checklist
The external M12x1.25 screw shortens the extend stroke by up to 10 mm, allowing usable end positions between 90 and 100 mm. The included -S magnet enables tracking by AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.