
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X100-20S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 80 to 100 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X100-20S is a compact double-acting double-rod cylinder built for on-site stroke tuning. An external M12x1.25 adjuster screw lets you dial the extend stop anywhere between 80 and 100 mm, eliminating the need for shims or part swaps during machine commissioning. The short riveted body saves valuable axial mounting depth where larger profile or round-body units will not fit.
The integrated -S piston magnet supports AirTAC reed or electronic solid-state switches for precise end-position sensing. End-of-travel deceleration is handled by a fixed NBR bumper, not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X100-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 100 mm |
| Adjustable range | 80 – 100 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the extend stop from 80 to 100 mm on the fly to accommodate different part heights during production line changeovers without swapping cylinders.
Perfect for prototype assembly stations where the exact extension point needs iterative mechanical tuning before finalizing the fixture design.
Stepping down to an SDAJ32 yields 402.1 N, whereas stepping up to an SDAJ50 provides 981.7 N.
Choose this model if your fixture requires exact extend positioning between 80 and 100 mm during changeovers. It features a 16 mm rod, a female M8x1.25 rod-end thread, and a PT1/8 port. Remember that a plain cylinder does not hold a load when air is lost or the valve is centred; the piston drifts and the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa, with a proof pressure of 1.5 MPa, and runs at speeds of 30-500 mm/s.
The external R (M12x1.25) screw mechanically shortens the extend stroke by up to 20 mm, giving a usable range of 80 to 100 mm. It acts as a hard stop and does not alter the cylinder's force or lock mid-stroke. The -S suffix indicates a built-in piston magnet designed for AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.