
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X100-20SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 80 to 100 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X100-20SB is a compact double-acting double-rod cylinder featuring an on-site extend stop. By turning the R (M12x1.25) adjuster screw, you shorten the forward stroke anywhere within an 80 to 100 mm window without swapping parts.
This unit includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic switches, and a male-thread piston rod (-B, M14x1.5) for secure tooling attachment. The short riveted body minimizes axial footprint, while a fixed NBR bumper decelerates the piston at the end of travel. The adjuster sets a mechanical stop, not a mid-stroke lock.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X100-20SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 100 mm |
| Adjustable range | 80 – 100 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 80 and 100 mm to secure odd-sized castings.
Adjust the stroke on the line to deflect varying carton widths. The fixed NBR bumper absorbs the repeated end shocks of high-speed sorting cycles.
Use an external pilot-operated check valve to prevent the load from drifting downward if air pressure drops.
Choose this model if your fixture requires precise 80 to 100 mm forward positioning during changeovers.
Confirm the 40 mm bore, 100 mm maximum stroke, 20 mm adjust window, and PT1/8 port. The -S code enables solid-state or reed sensing, and -B supplies the male M14x1.5 rod end. Remember that a plain cylinder drifts when air is lost or the valve centres; the fixed bumper only softens the end impact. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum is 128 kgf at 1.0 MPa. Operating pressure spans 0.15 to 1.0 MPa, with a speed range of 30-500 mm/s.
The external M12x1.25 screw mechanically shortens the extend end-position from the 100 mm maximum down to 80 mm without shims. The -S option adds a piston magnet for AirTAC reed or electronic switches to confirm end-of-stroke position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.