
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X100-30B is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 70 to 100 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X100-30B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M12x1.25) screw, you shorten the forward stroke on-site across a 70 to 100 mm window without swapping shims or parts.
This variant utilizes a male M14x1.5 piston rod thread and a PT1/8 air port. The short riveted body drastically cuts axial mounting depth where larger profile or round-body units fail to fit. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X100-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 100 mm |
| Adjustable range | 70 – 100 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 70-100 mm clamping reach during tooling changeovers using the M12x1.25 adjuster, ensuring consistent holding without part redesign.
Set precise upper travel limits in vertical lift stations where the compact riveted body saves overhead space, keeping the 32 kg safe lift margin perfectly positioned.
Choose this model if your fixture requires on-site stroke tuning between 70 and 100 mm.
Confirm your parameters: 40 mm bore, 100 mm maximum stroke, 30 mm adjust window, PT1/8 port, male M14x1.5 rod, and no magnet. A plain cylinder does not hold a load if air pressure drops or the valve centers; the piston will drift, and the fixed bumper only decelerates near the end of travel. For suspended or gravity-loaded applications, integrate an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa.
The R (M12x1.25) screw mechanically shortens the extend stroke from the 100 mm maximum down to 70 mm without altering the force. This specific SKU lacks a piston magnet, so it cannot support reed or electronic switches; you would need the -S variant for sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.