
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X100-50 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 50 to 100 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X100-50 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. A front R (M12x1.25) screw lets you dial the extend position down from the 100mm maximum to 50mm directly on your machine, eliminating the need for shims or part swaps during changeovers.
Built with a short riveted body, this unit saves axial mounting depth where round-body or profile cylinders will not fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches; you would need the -S variant for position sensing.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X100-50 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 100 mm |
| Adjustable range | 50 – 100 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 100mm down to 50mm to accommodate varying raw casting widths on a milling fixture without machining new spacers.
Adjust the push rod end-point on the fly for different box depths, ensuring precise flap alignment during rapid format changeovers.
Set the exact 50-100mm extension for seating bearings, relying on the fixed NBR bumper to absorb the final seating shock.
Choose this model if your assembly requires frequent trial positioning or on-site stroke tuning between 50 and 100 mm.
Confirm your requirements for the PT1/8 port, the female M8x1.25 rod-end thread, and the 16mm rod diameter. Remember that a plain cylinder does not hold its load if air pressure drops or the valve centres; the piston will drift. For load holding without live pressure, install an external rod lock or a pilot-operated check valve alongside this actuator.
Quick checklist
The M12x1.25 R screw shortens the extend stroke by up to 50mm, allowing usable travel between 50 and 100mm. This SKU has no magnet and cannot take switches; adding the -S option provides a magnet for reed or electronic sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.