
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X100-75 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 25 to 100 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X100-75 is a compact double-acting double-rod cylinder featuring an external extend stop. Turning the R (M12x1.25) screw lets you dial the forward end-position anywhere between 25 and 100 mm directly on the machine.
Its short riveted body saves axial mounting depth where round-body or profile units will not fit. End shock is absorbed by a fixed NBR bumper rather than an adjustable air cushion. This specific SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X100-75 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 100 mm |
| Adjustable range | 25 – 100 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 25 to 100 mm via the M12x1.25 screw to perfect the gripper reach during initial commissioning without machining new spacers.
Choose this model when you need on-site stroke tuning during frequent changeovers.
Remember that a plain cylinder does not hold its load if air is lost or the valve centres; the piston drifts and the bumper only decelerates near the end. For secure load holding without live pressure, add an external rod lock or pilot-operated check valve. Confirm your bore, 100 mm max stroke, 75 mm window, PT1/8 port, female M8x1.25 rod thread, and no magnet.
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa.
The R (M12x1.25) screw mechanically shortens the extend stroke by up to 75 mm, yielding a usable 25-100 mm range. It sets the stop without changing force. This specific SKU has no magnet; you must select the -S variant to use reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.