
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X100-75SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 25 to 100 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X100-75SB is a compact double-acting double-rod cylinder featuring an external extend stop. By turning the M12x1.25 adjuster screw, you set the outward stroke anywhere between 25 and 100 mm directly on your machine. This on-machine tuning eliminates shims and part changes during frequent format changeovers.
This unit includes a built-in piston magnet (-S) for AirTAC reed or electronic switches and a male M14x1.5 piston rod thread (-B) instead of the default female M8x1.25. The short riveted body drastically saves axial mounting depth where a round-body or profile cylinder will not fit. End shock is handled by a fixed NBR bumper that decelerates the stroke end; it is not an adjustable air cushion. Operating speed ranges from 30 to 500 mm/s.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X100-75SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 100 mm |
| Adjustable range | 25 – 100 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 25 to 100 mm via the M12x1.25 screw to accommodate different product widths on packaging lines without changing hardware.
When sizing this 40 mm bore, evaluate both neighbours. Choose this specific model if your fixture requires exact trial positioning of the extend endpoint without swapping cylinders.
Confirm your parameters: 40 mm bore, 100 mm max stroke, 75 mm adjust window, PT1/8 port, male M14x1.5 rod thread, and a magnetic piston. Remember that a plain cylinder does not hold its load on air loss or when the valve is centred; the piston drifts. For load holding without live pressure, install an external rod lock or a pilot-operated check valve, as the fixed bumper only decelerates near the end and the screw is a mechanical stop, not a brake.
Quick checklist
The external M12x1.25 screw shortens the extend stroke by up to 75 mm, yielding a usable 25 to 100 mm range while retract remains full. The included -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.