
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X110-100S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 10 to 110 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X110-100S is a compact double-acting double-rod cylinder featuring an external extend stop. Turning the R (M12x1.25) adjuster screw lets you dial the forward end-position anywhere between 10 and 110 mm directly on your machine, eliminating the need for shims or part swaps during changeovers. Retract travel remains full length. The short riveted body saves axial mounting depth where round-body or profile cylinders will not fit.
This specific build includes a built-in piston magnet (-S) for AirTAC reed or electronic switches. End shock is managed by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X110-100S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 110 mm |
| Adjustable range | 10 – 110 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 100 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -100 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 10 to 110 mm via the R screw to accommodate varying material thicknesses without swapping mechanical spacers on the press line.
Set precise upper travel limits for multiple vertical lift tiers.
Choose this 100 mm window version if your fixture requires frequent trial positioning or wide product changeovers.
Confirm the 40 mm bore, 110 mm max stroke, 100 mm adjust window, and PT1/8 port. This unit has the -S magnet for sensing and a female M8x1.25 rod-end thread. Remember that a plain cylinder does not hold its load on air loss or when the valve is centered; the piston drifts. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and speed ranges from 30-500 mm/s.
The M12x1.25 R screw mechanically shortens the extend stroke by up to 100 mm, allowing on-machine tuning between 10 and 110 mm. It sets the stop position without changing force. The -S suffix denotes a built-in piston magnet for use with AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.