
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X110-20B is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 90 to 110 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X110-20B is a double-acting compact cylinder featuring an external adjustable extend stop. By turning the R (M12x1.25) screw, you shorten the forward stroke by up to 20 mm, dialling the rod end precisely between 90 and 110 mm on the machine without swapping shims or parts.
This variant features a male M14x1.5 piston rod thread and a PT1/8 air port. The short riveted body saves axial mounting depth where a round-body or profile cylinder will not fit. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this SKU lacks a piston magnet, so it cannot accept magnetic switches; adding the -S option enables reed or electronic sensing.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X110-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 110 mm |
| Adjustable range | 90 – 110 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 90 to 110 mm during product changeovers to set new forming depths without machining new spacers.
Choose this male-rod (-B) model if your tooling mates with an M14x1.5 thread; otherwise, the default female M8x1.25 rod end applies.
This unit is ideal for setups requiring frequent on-machine stroke tuning during changeovers. Remember that a plain cylinder does not hold its load on air loss or when the valve is centred—the piston drifts, and the fixed bumper only decelerates near the end of the stroke. For load holding without live pressure, install an external rod lock or a pilot-operated check valve. Confirm your bore, 110 mm max stroke, 20 mm window, PT1/8 port, and lack of magnet before ordering.
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa.
The M12x1.25 adjuster screw mechanically limits the extend stroke between 90 and 110 mm; it does not alter force. It is not a mid-stroke lock, and the cylinder cannot hold a load if air pressure is lost.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.