
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X110-40 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 70 to 110 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X110-40 is a compact double-acting double-rod cylinder featuring an external extend stop. An M12x1.25 adjuster screw lets you dial the outward stroke anywhere between 70 and 110 mm directly on the machine, eliminating the need for shims or part swaps during changeovers.
Its short riveted body drastically reduces axial mounting depth where a larger profile cylinder would fail to fit. The bore uses a PT1/8 air port and a 16 mm piston rod. End-of-travel energy is managed solely by a fixed NBR bumper, which decelerates the piston rather than acting as a lock or an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X110-40 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 110 mm |
| Adjustable range | 70 – 110 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Shorten the outward stroke on the fly to push varied box sizes off the belt, relying on the fixed NBR bumper to absorb the impact at high speed.
Set the mechanical stop to raise platforms to specific intermediate heights, taking advantage of the compact riveted body to fit tight vertical spaces.
When sizing this 40 mm bore, evaluate both neighboring options against your 0.5 MPa requirements. Choose the 40 mm if your setup-heavy lines require frequent on-machine stroke tuning across a 70-110 mm window.
Confirm the bore, 110 mm maximum stroke, 40 mm adjust window, PT1/8 port, and female rod-end thread match your footprint. This specific SKU lacks the -S magnet, so it cannot accept reed or electronic switches. Remember that a plain cylinder does not hold a load if air pressure drops or the valve centers; the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa, with a proof pressure of 1.5 MPa, and runs at speeds of 30-500 mm/s.
Turning the M12x1.25 R screw shortens the extend stroke by up to 40 mm, giving a usable range of 70-110 mm. The screw acts purely as a mechanical stop and does not alter the bore's output force. It is not a mid-stroke lock; if air is lost, the cylinder will drift, so use an external rod lock for load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.