
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X110-40S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 70 to 110 mm on the machine — no shims, no part change.
The SDAJ40X110-40S is a double-acting compact cylinder featuring a 40mm bore and a 110mm maximum stroke. An external M12x1.25 adjuster screw lets you dial the extend end-position anywhere between 70 and 110mm directly on your machine, eliminating the need for shims or part swaps during changeovers.
Built with a short riveted body, this unit saves valuable axial mounting depth where larger profile cylinders cannot fit. It includes a built-in piston magnet (-S) for AirTAC reed or electronic switches and relies on a fixed NBR bumper at each end to decelerate the stroke. Operating speed ranges from 30-500mm/s across a 0.15-1.0MPa pressure range.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X110-40S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 110 mm |
| Adjustable range | 70 – 110 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 70 to 110mm to accommodate varying raw material thicknesses on a milling fixture without machining new spacers.
Fine-tune the push rod end-point on the fly for different box heights, ensuring precise flap alignment during high-changeover packaging runs.
Choose this specific model if your fixture setup requires frequent trial positioning or on-machine stroke tuning within that 70-110mm window.
Confirm your required extend window, the PT1/8 port, and the female M8x1.25 rod-end thread. The -S code ensures you have the magnet for solid-state or reed sensing. Note that a plain cylinder does not hold its load if air pressure drops or the valve is centered—the piston will drift. For load holding without live pressure, you must integrate an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.7MPa, push increases to 879.6N. The theoretical maximum push is 128kgf at 1.0MPa.
The M12x1.25 screw shortens the extend stroke by up to 40mm, yielding a usable 70-110mm range. The -S code denotes a built-in magnet compatible with AirTAC reed or electronic switches for end-position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.