verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X110-50

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X110-50 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 60 to 110 mm on the machine — no shims, no part change.

  • BoreØ40 mm
  • Max stroke110 mm
  • Adjustable range60–110 mm
  • Adjuster threadM12×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$79.78 $87.28Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ40 stroke, mounting and version on one page All SDAJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X110-50

The AirTAC SDAJ40X110-50 is a compact double-acting double-rod cylinder featuring an external M12x1.25 adjuster screw that dials the extend stop anywhere between 60 and 110 mm. The short riveted body drastically cuts axial mounting depth, fitting where round-body or profile cylinders cannot.

End-of-travel energy is managed strictly by a fixed NBR bumper that decelerates the piston, meaning it is not an adjustable air cushion. Operating pressure spans 0.15 to 1.0 MPa, and the unit travels at 30 to 500 mm/s. This specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches without changing to an -S variant.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X110-50 Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X110-50
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ40 mm
Max stroke110 mm
Adjustable range60 – 110 mm
Adjuster thread (R)M12×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM8×1.25 F / M14×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X110-50

SDAJCompact double-acting cylinder with adjustable stroke.
40Bore size in mm.
×110Maximum stroke length in mm.
-50Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X110-50 Is Used

precision_manufacturing

Tooling Changeover

Dial the extend stop from 60 to 110 mm during machine changeover to accommodate different part heights without machining new spacers.

vertical_align_center

Vertical Lift Stops

Set precise upper travel limits for a 32 kg vertical lift, relying on the external screw to set the stop rather than a cushion valve.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X110-50 the Right Cylinder?

Choose this 110 mm maximum stroke with the 50 mm window if your machine commissioning requires on-site extend tuning without part changes.

Confirm the required bore, 110 mm stroke, 50 mm adjust window, and PT1/8 port. This base configuration has no magnet (no -S) and uses a female M8x1.25 rod-end thread. Remember that the fixed bumper and mechanical stop do not secure the load; if air pressure drops or the valve centres, the piston drifts. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 60–110 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M12×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X110-50 FAQ

The theoretical maximum push is 128 kgf at 1.0 MPa. Operating pressure is 0.15 to 1.0 MPa with a speed range of 30 to 500 mm/s.

Turning the R (M12x1.25) screw shortens the extend stroke by up to 50 mm, allowing the rod to stop anywhere between 60 and 110 mm. Retract remains full stroke. This SKU has no piston magnet; to use reed or electronic switches, you must select the -S magnet option.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X110-50

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ40X110-50 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.