
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X110-50B is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 60 to 110 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X110-50B is a compact double-acting double-rod cylinder built for applications requiring a custom extend end-position. An external M12x1.25 adjuster screw lets you dial the forward stop anywhere between 60 and 110 mm directly on the machine, eliminating the need for shims or part swaps.
This 40 mm bore unit features a male M14x1.5 piston rod thread and a PT1/8 air port. Its short riveted body saves valuable axial mounting depth where a larger profile cylinder would not fit. End-of-stroke deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion, keeping the overall length minimal. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic sensing.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X110-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 110 mm |
| Adjustable range | 60 – 110 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 60 and 110 mm to perfectly seat varying part fixtures without machining custom spacers, relying on 628.3 N of clamping push at 0.5 MPa.
Adjust the male M14x1.5 rod extension on the fly for different box heights, using the fixed NBR bumper to absorb the repetitive end-of-stroke shock during high-speed changeovers.
The SDAJ40X110-50B is ideal for setups needing frequent on-machine stroke tuning between 60 and 110 mm.
Keep in mind that a plain cylinder does not hold its load if air pressure drops or the valve is centered; the piston will drift and the fixed bumper only decelerates near the end of travel, acting as a mechanical stop rather than a lock. For suspended or vertical loads, you must integrate an external rod lock or a pilot-operated check valve. Confirm your requirements for the 110 mm max stroke, 50 mm adjust window, PT1/8 port, and the male M14x1.5 rod thread before ordering.
Quick checklist
The theoretical maximum push force is 128 kgf at 1.0 MPa.
The external M12x1.25 screw shortens the extend stroke by up to 50 mm, allowing you to set the forward stop anywhere from 60 to 110 mm without changing parts. This specific SKU does not include a piston magnet; you must select the -S variant to use AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.