
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X110-75B is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 35 to 110 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X110-75B is a compact double-acting double-rod cylinder built for on-site stroke tuning. An external M12x1.25 adjuster screw lets you dial the extend end-position anywhere between 35 and 110 mm without changing parts.
This variant features a male M14x1.5 piston rod thread and a PT1/8 port. The short riveted body saves valuable axial mounting depth where larger profile cylinders cannot fit. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches without upgrading to the -S option.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X110-75B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 110 mm |
| Adjustable range | 35 – 110 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 35 and 110 mm to accommodate raw material thickness variations on a milling fixture without machining custom spacers.
Set a precise lower dead stop for inserting bearings, using the mechanical adjuster to prevent over-travel while maintaining a safe 377 N working load.
Choose this model if your fixture requires frequent changeovers or trial positioning within its 35-110 mm extend window.
Confirm the 40 mm bore, 110 mm maximum stroke, 75 mm adjustment window, and PT1/8 port suit your manifold. This SKU includes the -B male M14x1.5 rod thread; ensure your mating clevis or load attachment matches. A plain SDAJ does not hold position or load when air is lost or the valve is centred—the fixed bumper only decelerates near the end. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
Quick checklist
Turning the external M12x1.25 screw shortens the extend stroke by up to 75 mm, allowing endpoints between 35 and 110 mm. This specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches; you must select the -S magnet option for sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.