verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-10

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-10 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 110 to 120 mm on the machine — no shims, no part change.

  • BoreØ40 mm
  • Max stroke120 mm
  • Adjustable range110–120 mm
  • Adjuster threadM12×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$86.50 $94.00Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ40 stroke, mounting and version on one page All SDAJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-10

The AirTAC SDAJ40X120-10 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. A front R (M12x1.25) screw lets you dial the extend position anywhere between 110 and 120 mm directly on the machine, eliminating the need for shims or part swaps during changeovers. Retract travel remains full length.

The short riveted body minimizes axial footprint, while a fixed NBR bumper decelerates the end of stroke. Note this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-10 Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-10
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ40 mm
Max stroke120 mm
Adjustable range110 – 120 mm
Adjuster thread (R)M12×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM8×1.25 F / M14×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-10

SDAJCompact double-acting cylinder with adjustable stroke.
40Bore size in mm.
×120Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-10 Is Used

precision_manufacturing

Tooling Calibration

Dial in the 110-120 mm extend stop during initial tooling setup to precisely set forming depth without machining custom spacers.

vertical_align_center

Vertical Lift Stops

Set precise upper travel limits for light vertical lifting tasks up to 32 kg, relying on the fixed NBR bumper to absorb end shock.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-10 the Right Cylinder?

This model is ideal for setups requiring precise on-site stroke tuning within its 10 mm window. Remember that a plain cylinder does not hold a load if air pressure drops or the valve centers; the bumper only decelerates near the end and the screw is a stop, not a lock. For suspended loads, specify an external rod lock or pilot-operated check valve. Confirm your bore, 120 mm stroke, 10 mm window, PT1/8 port, female rod thread, and lack of magnet (S) before ordering.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 110–120 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M12×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-10 FAQ

Turning the R (M12x1.25) screw mechanically shortens the extend stroke by up to 10 mm, allowing you to set the endpoint anywhere between 110 and 120 mm. It does not alter the output force.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-10

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ40X120-10 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.