
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-10B is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 110 to 120 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X120-10B is a compact double-acting double-rod cylinder built with a riveted body that minimizes axial mounting depth in tight machinery spaces. It features an external M12x1.25 adjustment screw that lets you dial the extend stop down from the 120mm maximum to 110mm directly on the machine, eliminating the need for shims or part swaps during changeovers.
This specific configuration includes a male-thread M14x1.5 piston rod end for secure mechanical coupling. End-of-stroke deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion, meaning the stop sets the position but does not lock the load. Note that this SKU lacks a piston magnet, so it cannot support reed or electronic switches without switching to the -S variant.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 120 mm |
| Adjustable range | 110 – 120 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×120 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the male M14x1.5 rod extension on-site to accommodate different box profiles, ensuring precise mechanical positioning before the fixed NBR bumper takes the end shock.
Choose this model if your setup-heavy line requires frequent trial positioning or on-machine stroke tuning within the 110-120mm window.
Confirm the 40mm bore, 120mm stroke, 10mm adjust window, PT1/8 port, and the male M14x1.5 rod thread suit your tooling. Remember that a plain cylinder drifts when air is lost or the valve is centered; the fixed bumper only decelerates near the end and the adjuster is a mechanical stop, not a lock. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
Quick checklist
The air port is PT1/8.
Turning the external M12x1.25 screw shortens the extend stroke by up to 10mm, giving a usable range of 110-120mm; retract remains full. This specific SKU lacks a piston magnet, so it cannot take a magnetic switch—you must select the -S variant for reed or electronic sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.