
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-30B is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 90 to 120 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X120-30B is a compact double-acting double-rod cylinder featuring an on-site extend stop. Its M12x1.25 adjuster screw lets you dial the forward stroke anywhere between 90 and 120 mm without swapping parts.
This variant features a male M14x1.5 piston rod thread and a PT1/8 port. The short riveted body conserves axial mounting depth in tight machine envelopes. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 120 mm |
| Adjustable range | 90 – 120 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×120 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 90 to 120 mm during product family changeovers to set new end positions without machining replacement spacers.
Fine-tune the male M14x1.5 rod extension on the fly to accommodate varying box heights while maintaining 628.3 N of extend push force.
Sweep the 30 mm adjustment window to find the exact 377 N safe working distance for trial actuation before locking down the final design.
When sizing, verify if the 40 mm bore fits your load requirements.
Choose this male-rod (-B) configuration if your tooling requires an external thread mount. Remember that a plain cylinder does not hold position on air loss or valve centering; the piston drifts and the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve. Confirm your 40 mm bore, 120 mm max stroke, 30 mm window, PT1/8 port, and lack of a magnet before ordering.
Quick checklist
At 0.7 MPa, push increases to 879.6 N and pull to 738.9 N. The theoretical maximum push is 128 kgf at 1.0 MPa.
The external M12x1.25 R screw shortens the extend end position by up to 30 mm, yielding a usable forward range of 90 to 120 mm. Retract remains full length. Note that this SKU lacks the -S magnet, so it cannot accept reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.