
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-40 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 80 to 120 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X120-40 is a double-acting compact cylinder featuring an external M12x1.25 adjuster screw that dials the extend stop anywhere between 80 and 120 mm. The short riveted body drastically reduces axial mounting depth where conventional round-body units cannot fit.
End-of-travel deceleration relies on a fixed NBR bumper rather than an adjustable air cushion, handling standard impact energy without external valves. Operating speed spans 30-500 mm/s, and the PT1/8 port supplies air efficiently to the 16 mm piston rod. This specific SKU lacks a piston magnet, so it cannot host reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-40 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 120 mm |
| Adjustable range | 80 – 120 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×120 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the actuator endpoint on the fly during format changeovers, ensuring the diverter meets cartons accurately while keeping the assembly footprint minimal.
Set precise upper travel limits for lifts carrying up to 32 kg, relying on the fixed NBR bumper to absorb the stopping energy at the end of the stroke.
Choose this model when your fixture demands on-site stroke tuning across an 80 to 120 mm window without swapping shims.
Remember that a plain SDAJ does not hold position if air pressure drops or the valve centres; the bumper only decelerates near the end cap. For suspended loads, integrate an external rod lock or pilot-operated check valve. Confirm your build needs the female M8x1.25 rod thread, a 40 mm adjust window, PT1/8 port, and no magnet (S) or male rod (B) options.
Quick checklist
The theoretical maximum push force is 128 kgf at 1.0 MPa.
An external M12x1.25 screw mechanically shortens the extend endpoint from the 120 mm maximum down to 80 mm. It acts purely as a physical stop, meaning force remains unchanged, and it does not lock the piston mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.