
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-40B is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 80 to 120 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X120-40B is a compact double-acting double-rod cylinder featuring an external extend stop. A front R (M12x1.25) adjustment screw lets you dial the forward end-position anywhere between 80 and 120 mm directly on the machine.
This variant uses a male M14x1.5 piston rod thread and lacks a piston magnet, meaning it cannot accept reed or electronic switches without switching to the -S option. The short riveted body minimizes axial mounting depth where space is tight. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 120 mm |
| Adjustable range | 80 – 120 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×120 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 80 and 120 mm to position a clamp precisely on variable part widths without machining custom spacers.
Rapidly reposition a pusher rod for different product lengths on a packaging line, using the M12x1.25 adjuster to hit exact ejection points.
Choose this adjusted-stop model if your fixture requires frequent changeovers or trial positioning between 80 and 120 mm.
Confirm your parameters: 40 mm bore, 120 mm maximum stroke, 40 mm adjust window, PT1/8 port, male M14x1.5 rod thread, and no magnet. Note that a plain cylinder drifts when air is lost or the valve is centered; the fixed bumper only decelerates near the end of travel and is not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa.
Turning the external R (M12x1.25) screw mechanically shortens the extend stroke by up to 40 mm, allowing the rod to stop anywhere from 80 to 120 mm. It sets the physical stop position and does not alter the output force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.