verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-40S

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-40S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 80 to 120 mm on the machine — no shims, no part change.

  • BoreØ40 mm
  • Max stroke120 mm
  • Adjustable range80–120 mm
  • Adjuster threadM12×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$97.21 $104.71Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ40 stroke, mounting and version on one page All SDAJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-40S

The AirTAC SDAJ40X120-40S is a compact double-acting double-rod cylinder featuring an external extend stop. A front R (M12x1.25) adjuster screw lets you dial the outward travel down by up to 40 mm directly at the machine, yielding a usable extension window of 80 to 120 mm without swapping shims or parts.

This 40 mm bore unit carries a built-in piston magnet (-S) for AirTAC reed or electronic solid-state switches. Its short riveted body saves valuable axial mounting depth where a larger profile cylinder will not fit. End-of-travel energy is absorbed by a fixed NBR bumper, which decelerates the piston near the end but is not an adjustable air cushion or a locking brake.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-40S Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-40S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ40 mm
Max stroke120 mm
Adjustable range80 – 120 mm
Adjuster thread (R)M12×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM8×1.25 F / M14×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-40S

SDAJCompact double-acting cylinder with adjustable stroke.
40Bore size in mm.
×120Maximum stroke length in mm.
-40Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-40S Is Used

precision_manufacturing

Tooling Format Changeover

Dial in the extend stop from 80 to 120 mm via the R screw when swapping machining fixtures, eliminating the need for manual shim stacks during product line transitions.

packaging

Variable Carton Sealing

Accommodate different box heights on a packaging line by tweaking the outward stroke position on the fly, ensuring precise flap folding without changing actuator hardware.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-40S the Right Cylinder?

Choose this specific unit when you need on-site stroke tuning during frequent format changeovers.

Confirm your parameters: 40 mm bore, 120 mm max stroke, 40 mm adjust window, PT1/8 port, female M8x1.25 rod thread, and the -S magnet for sensing. Remember that a plain cylinder does not hold a load if air pressure drops or the valve centres—the piston drifts. For suspended or vertical loads, install an external rod lock or a pilot-operated check valve, as the fixed bumper only decelerates at the very end of travel and never acts as a mid-stroke brake.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 80–120 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M12×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-40S FAQ

The theoretical maximum push force is 128 kgf at 1.0 MPa.

The front M12x1.25 screw shortens the extend stroke by up to 40 mm, giving an adjustable range of 80 to 120 mm; retract remains full. The included -S magnet works with AirTAC reed or electronic switches for position sensing, while the fixed NBR bumper handles end-of-stroke deceleration.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-40S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ40X120-40S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.