
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-50 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 70 to 120 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X120-50 is a double-acting compact cylinder featuring an external adjustable extend stop. By turning the R (M12x1.25) screw, you can dial the forward stroke down from the 120mm maximum to as low as 70mm directly on the machine, avoiding part swaps or shims. Retract travel remains full length.
The short riveted body minimizes axial mounting depth where space is tight. End-of-travel deceleration relies on a fixed NBR bumper, which is not an adjustable air cushion or a locking mechanism.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-50 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 120 mm |
| Adjustable range | 70 – 120 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×120 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 120mm down to 70mm to accommodate varying raw casting widths on a fixture without machining new spacers.
Set the exact raise height for a 32kg payload, relying on the fixed NBR bumper to absorb the end shock without needing adjustable air cushioning.
Choose this model when setup requires frequent on-site stroke tuning between 70mm and 120mm.
Confirm the 40mm bore, 120mm stroke, 50mm adjust window, and PT1/8 port for your manifold. This specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches; specify the -S option if sensing is required. Note that a plain cylinder drifts on air loss or valve centring, so fit an external rod lock or pilot-operated check valve for load holding.
Quick checklist
This 40mm bore double-acting cylinder uses a PT1/8 port.
The M12x1.25 adjuster screw mechanically shortens the extend stop from 120mm down to 70mm without changing the force. It is not a mid-stroke lock; the cylinder drifts on air loss, so use an external rod lock for holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.