
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-75 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 45 to 120 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X120-75 is a compact double-acting double-rod cylinder built for applications requiring exact extend positioning. By turning the external M12x1.25 adjuster screw, you set the extend stop anywhere between 45 and 120 mm directly on the machine, avoiding shims or part swaps. Retract remains full length, while the push force stays identical to a standard SDA at 628.3 N (0.5 MPa).
This model features a short riveted body that saves axial mounting depth where larger profile cylinders will not fit. End-of-stroke deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. Note this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches; choose the -S variant if sensing is required.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X120-75 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 120 mm |
| Adjustable range | 45 – 120 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×120 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 45 to 120 mm via the M12x1.25 screw to accommodate varying fixture heights during rapid product family changeovers.
Set precise fold depths on the fly using the mechanical stop, ensuring consistent carton sealing without reprogramming motion controllers.
Choose this model if your setup-heavy line demands frequent on-site stroke tuning across the 75 mm window.
Confirm your parameters: 40 mm bore, 120 mm max stroke, 75 mm adjust window, PT1/8 port, female M8x1.25 rod thread, and no magnet. Because a plain cylinder drifts when air is lost or the valve centers, the bumper only decelerates near the end—it is not a lock. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa.
Turning the external R (M12x1.25) screw mechanically shortens the extend endpoint anywhere between 45 and 120 mm. This sets the physical stop position without altering the bore area or force, and it does not lock the piston mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.