
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X130-10 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 120 to 130 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X130-10 is a compact double-acting double-rod cylinder built for applications requiring exact extend positioning. An external M12x1.25 adjuster screw lets you dial the forward stop down by 10 mm, providing a usable range of 120 to 130 mm without swapping parts.
This riveted-body design saves considerable axial mounting depth where space is tight. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic sensing without upgrading to the -S variant.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X130-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 130 mm |
| Adjustable range | 120 – 130 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×130 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 120-130 mm extend stop during machine changeovers to accommodate different part heights without fabricating new spacers.
Use the precise 10 mm adjustment window to set metal bending stops on the fly, ensuring accurate angles across varying material batches.
When sizing this 40 mm bore actuator, evaluate your force requirements carefully.
Choose this model if your assembly requires on-site stroke tuning between 120 and 130 mm via the M12x1.25 screw. Confirm your porting matches the PT1/8 air connection and that the female M8x1.25 rod thread suits your load. A plain pneumatic actuator will not hold a load if air pressure drops or the valve centers; the fixed bumper only decelerates the stroke end. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.7 MPa, push increases to 879.6 N. The theoretical maximum push force is 128 kgf at 1.0 MPa.
Turning the external R (M12x1.25) screw mechanically shortens the extend end position anywhere between 120 and 130 mm. It acts only as a physical stop and does not alter force. The cylinder cannot hold a load on air loss; you need an external rod lock for that.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.