
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X130-10B is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 120 to 130 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X130-10B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the R (M12x1.25) screw lets you dial the extend position anywhere between 120 and 130 mm directly on the machine, avoiding part swaps during commissioning.
This specific SKU includes a male M14x1.5 piston rod thread and lacks a piston magnet, meaning it cannot host reed or electronic switches without the -S option. The short riveted body saves axial mounting depth where larger profile cylinders will not fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X130-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 130 mm |
| Adjustable range | 120 – 130 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×130 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 120 to 130 mm during fixture swaps to accommodate varying part heights without machining new spacers.
Fine-tune the pusher endpoint by 10 mm on-site to align product routing accurately as belt speeds and formats shift.
It is ideal for setups requiring on-site stroke tuning within the 120-130 mm window.
Confirm your parameters: 40 mm bore, 130 mm maximum stroke, 10 mm adjuster window, PT1/8 port, and a male M14x1.5 rod thread. Note that this plain cylinder does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end of travel. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
Quick checklist
The M12x1.25 adjuster screw mechanically shortens the extend stroke from the 130 mm maximum down to 120 mm. It sets the stop position without altering the force, and it is not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.