
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X130-20 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 110 to 130 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X130-20 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. A built-in M12x1.25 adjuster screw lets you dial the forward end-position anywhere between 110 and 130 mm directly on the machine, avoiding part swaps during setup.
Its short riveted body significantly reduces axial mounting depth where a larger profile cylinder will not fit. The bore uses a fixed NBR bumper to decelerate the stroke end rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to an -S variant.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X130-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 130 mm |
| Adjustable range | 110 – 130 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×130 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 110 to 130 mm to secure varied part widths on a milling fixture without machining custom spacers.
Fine-tune the push rod end point on the fly to accommodate different box heights, ensuring precise flap closure every time.
Choose this specific 130 mm stroke with a 20 mm window if your fixture requires trial positioning and frequent changeovers.
Confirm the required bore, 130 mm maximum stroke, 20 mm adjustability window, and PT1/8 air port for your setup. This model has a female M8x1.25 rod-end thread and no piston magnet. Remember that a plain SDAJ does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end, so integrate an external rod lock or pilot-operated check valve for load holding without live pressure.
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa, with a proof pressure of 1.5 MPa, and runs at speeds of 30-500 mm/s.
The external M12x1.25 screw acts as a mechanical stop, allowing you to shorten the extend stroke from the 130 mm maximum down to 110 mm. It does not alter the piston area or force. The cylinder cannot hold a load on air loss; you must add an external rod lock or pilot-operated check valve for position holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.