
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X130-30B is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 100 to 130 mm on the machine — no shims, no part change.
The SDAJ40X130-30B is a compact double-acting double-rod cylinder featuring a male M14x1.5 piston rod and an external R (M12x1.25) adjuster screw. This mechanism lets you dial the extend end-position anywhere between 100 and 130 mm directly on the machine, eliminating the need for shims or part swaps during setup.
Its short riveted body conserves axial mounting depth where round-body or profile cylinders will not fit. End-of-travel deceleration relies on a fixed NBR bumper, which is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches; adding the -S option enables sensing.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X130-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 130 mm |
| Adjustable range | 100 – 130 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×130 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 100 to 130 mm via the M12x1.25 screw to accommodate varying jig heights during production line changeovers without swapping cylinders.
Choose this 130 mm maximum extend configuration when you need on-site stroke tuning between 100 and 130 mm.
Confirm the required bore, 130 mm stroke, 30 mm adjustment window, PT1/8 port, and male M14x1.5 rod thread. A plain SDAJ does not hold position or load when air is lost or the valve is centered—the fixed bumper only decelerates near the end and the adjuster is a mechanical stop, not a lock. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa.
Turning the external R (M12x1.25) screw shortens the extend stroke by up to 30 mm, allowing you to set the endpoint anywhere between 100 and 130 mm. The retract stroke remains full, and the mechanism acts as a mechanical stop rather than a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.