
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X130-40B is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 90 to 130 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X130-40B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M12x1.25) screw, you can dial the extend end-position anywhere between 90 and 130 mm directly on the machine, eliminating the need for shims or part swaps during changeovers.
This variant uses a 40 mm bore with a male-thread M14x1.5 piston rod and a PT1/8 port. Its short riveted body saves valuable axial mounting depth where larger profile cylinders cannot fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic sensing without upgrading to the -S option.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X130-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 130 mm |
| Adjustable range | 90 – 130 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×130 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 90 to 130 mm clamping reach on the fly for varying fixture sizes without machining new spacers.
Adjust the extend stop to accommodate different box heights on a packaging line, ensuring precise flap alignment.
Choose this adjustable model if your application requires frequent trial positioning or on-site stroke tuning between 90 and 130 mm.
Confirm the 40 mm bore, 130 mm maximum stroke, 40 mm adjustment window, PT1/8 port, and male M14x1.5 rod thread for your mounting interface. Remember that a plain cylinder does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end of travel. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push force is 128 kgf at 1.0 MPa.
The external R (M12x1.25) screw mechanically shortens the extend stroke by up to 40 mm, allowing you to set the end position anywhere between 90 and 130 mm. This SKU does not include a piston magnet, so it cannot accept a switch; you would need the -S variant for reed or electronic sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.