verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X130-50

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X130-50 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 80 to 130 mm on the machine — no shims, no part change.

  • BoreØ40 mm
  • Max stroke130 mm
  • Adjustable range80–130 mm
  • Adjuster threadM12×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$93.02 $100.52Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ40 stroke, mounting and version on one page All SDAJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X130-50

The AirTAC SDAJ40X130-50 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M12x1.25 adjuster screw lets you dial the extend position anywhere between 80 and 130 mm directly on the machine, avoiding part changes or shims during setup. Retract travel remains full length.

The short riveted body saves axial mounting depth where a round-body or profile cylinder will not fit. End shock is handled by a fixed NBR bumper, which decelerates the stroke but is not an adjustable air cushion.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X130-50 Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X130-50
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ40 mm
Max stroke130 mm
Adjustable range80 – 130 mm
Adjuster thread (R)M12×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM8×1.25 F / M14×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X130-50

SDAJCompact double-acting cylinder with adjustable stroke.
40Bore size in mm.
×130Maximum stroke length in mm.
-50Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X130-50 Is Used

precision_manufacturing

Machine Tending Setup

Dial the extend stop from 80 to 130 mm to perfect the tool reach during initial commissioning without machining new spacers.

vertical_align_center

Vertical Lift Stops

Set precise lower end positions for lifts carrying up to 32 kg, relying on the fixed NBR bumper to absorb the end shock.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X130-50 the Right Cylinder?

This SDAJ40X130-50 is ideal for operators needing on-site stroke tuning for changeovers.

Confirm the 40 mm bore, 130 mm maximum stroke, 50 mm adjust window, and PT1/8 port. This SKU lacks a piston magnet, so it cannot take a magnetic switch; specify the -S variant if you need reed or electronic sensing. A plain cylinder does not hold its load on air loss or valve centring—the piston drifts and the bumper only decelerates near the end. For a held load, use an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 80–130 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M12×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X130-50 FAQ

The theoretical maximum push is 128 kgf at 1.0 MPa.

Turning the R (M12x1.25) screw shortens the extend end position by up to 50 mm, giving a usable extend range of 80 to 130 mm. The screw sets the mechanical stop position and does not alter the output force.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X130-50

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ40X130-50 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.