
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X130-50B is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 80 to 130 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X130-50B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M12x1.25) screw, you can shorten the extend stroke on-site by up to 50 mm, yielding a usable forward range of 80 to 130 mm without changing parts.
This unit saves axial mounting depth where a round-body or profile cylinder will not fit, thanks to its short riveted body. It carries a male-threaded piston rod (M14x1.5) for direct load attachment and uses a PT1/8 air port. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without the -S option.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X130-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 130 mm |
| Adjustable range | 80 – 130 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×130 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 80 and 130 mm to accommodate varying raw casting lengths on a milling fixture without machining new shims.
Set a precise metal bending depth by adjusting the M12x1.25 screw, easily repositioning the mechanical stop for multiple prototype angles.
When sizing this 40 mm bore actuator, evaluate both neighbouring bores at 0.5 MPa. Choose this model if your fixture requires frequent on-machine stroke tuning across an 80 to 130 mm window. Confirm your parameters: 40 mm bore, 130 mm max stroke, 50 mm adjust window, PT1/8 port, male M14x1.5 rod thread, and no magnet.
Remember that a plain pneumatic cylinder does not hold a load when air is lost or the directional valve is centred. The piston will drift, and the fixed NBR bumper only decelerates the stroke near its end without acting as a lock or brake. If your application demands load holding without live pressure, integrate an external rod lock or a pilot-operated check valve into the pneumatic circuit.
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa.
Turning the external R (M12x1.25) screw mechanically shortens the extend end position from the 130 mm maximum down to 80 mm, without altering the force. This specific SKU lacks a piston magnet, so it cannot take a switch; you must select the -S variant for reed or electronic sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.