
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X130-75 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 55 to 130 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X130-75 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M12x1.25) screw, you can dial the forward stroke anywhere between 55 and 130 mm directly on the machine without swapping shims or parts.
The short riveted body saves valuable axial mounting depth where a round-body or profile cylinder will not fit. End-of-travel deceleration is handled by a fixed NBR bumper at each end, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X130-75 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 130 mm |
| Adjustable range | 55 – 130 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×130 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the mechanical stop on the fly for different box heights, ensuring precise folding without reprogramming the motion controller.
Choose this model if your fixture requires frequent on-site stroke tuning across a 75 mm window. Confirm your setup needs a 130 mm maximum stroke with PT1/8 air ports, a 16 mm rod with a female M8x1.25 thread, and no magnet. Remember that a plain cylinder does not hold its load on air loss or when the valve is centered; for secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa, with a proof pressure of 1.5 MPa, and runs at speeds of 30-500 mm/s.
The R (M12x1.25) adjuster screw mechanically shortens the extend stroke by up to 75 mm, allowing you to set the forward position anywhere from 55 to 130 mm. It does not alter the output force. This screw is a mechanical stop, not a mid-stroke lock; the cylinder cannot hold a load if air pressure is lost or the valve is centered.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.