
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X130-75B is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 55 to 130 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X130-75B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the M12x1.25 adjuster screw, you can dial the forward stroke down by up to 75 mm directly on your machine, yielding a usable travel range of 55 to 130 mm without swapping shims or parts.
This variant features a male M14x1.5 piston rod thread and ships without a magnet. The short riveted body saves valuable axial mounting depth where a larger profile cylinder will not fit. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating speed spans 30 to 500 mm/s across a 0.15 to 1.0 MPa pressure range.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X130-75B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 130 mm |
| Adjustable range | 55 – 130 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×130 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 130 mm down to 55 mm instantly when switching part families, using the M12x1.25 screw to set precise feeding depths without machining new spacers.
Safely test engagement depths during short-run production by creeping the stop inward from the maximum stroke, ensuring components mate perfectly before final lockdown.
Choose this specific model if your assembly line requires frequent changeovers or trial positioning within the 55 to 130 mm window.
Confirm the 40 mm bore, 130 mm maximum stroke, 75 mm adjust window, and PT1/8 port match your pneumatic supply. This SKU includes the -B male M14x1.5 rod end and has no -S magnet, so it cannot accept reed or electronic switches. Remember that a plain cylinder does not hold position on air loss; the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.
The external M12x1.25 screw acts as a mechanical stop, allowing you to shorten the extend stroke anywhere between 55 and 130 mm. It does not alter the cylinder's force, nor does it lock the piston mid-stroke; the fixed NBR bumper only decelerates the rod near the end of travel. For load holding, you need an external rod lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.