
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X15-10 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 5 to 15 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X15-10 is a double-acting compact cylinder featuring an external M12x1.25 adjuster screw that dials the extend stop between 5 and 15 mm on-site.
Its short riveted body drastically reduces axial mounting depth where larger profile or round-body units cannot fit. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X15-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 15 mm |
| Adjustable range | 5 – 15 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×15 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 5-15 mm extend stop to grip varying workpiece thicknesses on a machining fixture without swapping cylinder bodies.
Fine-tune the extend position during product family changeovers on a packaging line, using the M12x1.25 screw to hit exact ejection points.
Set precise 40 mm bore push points—up to 628.3 N at 0.5 MPa—during prototype assembly stations to find the optimal insertion depth before locking the stop.
If your application requires less force, stepping down to an SDAJ32 provides 402.1 N at 0.5 MPa, while moving up to an SDAJ50 yields 981.7 N for heavier demands.
Engineers who need frequent on-machine stroke tuning during changeovers will benefit from the 5-15 mm adjustment window. Keep in mind that a plain SDAJ does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve. Confirm your bore, 15 mm stroke, 10 mm window, PT1/8 port, female M8x1.25 rod thread, and lack of magnet for this configuration.
Quick checklist
Turning the R (M12x1.25) screw shortens the extend stop by up to 10 mm, yielding a usable 5-15 mm stroke range. The screw acts only as a mechanical stop and does not lock the piston; for load holding without air pressure, use an external rod lock or pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.